✨ New Arrivals Just Dropped!Explore
HomeStore

200MPa Vessel CIP Die Set (110 mm ID) for Cold Isostatic Press - CIP110D200

Product image 1
1 / 3

200MPa Vessel CIP Die Set (110 mm ID) for Cold Isostatic Press - CIP110D200

CIP110D200 is a CIP die set (Max. 200 MPa) for cold isostatic press with a 110 mm ID x 125 mm depth chamber. It is an excellent tool for preparing a Max. 4" dia. sample with a much higher density.

Specifications:
CIP Camber Size 110 mm ID x 125 mm Depth
Vessel Pressure
  • 0 - 200 MPa
  • 1 MPa / 5 min
Actual Force Applied on the Hydraulic Cylinder (Ton) 95 190
CIP Die Pressure (Mpa) 100 200
Compatible Press
200T Electric Hydraulic Press
Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic.1 to order).  Check this link to understand liquid rubber for sample preparation. 
  • You may use a small vacuum sealer to seal the sample before CIP inside a glovebox to avoid air contamination ( Click Pic. 2 to order)
  • You may use the machine as a dry pressing to order pressing die (click Pic below right)
  •      Pic. 1   Pic. 2   Pic. 3
Warning
  • Never let the press hold the target pressure be longer than 8 minutes
  • Normally, the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve have been tightened before pressing

 

$5,244.75

Original: $14,985.00

-65%
200MPa Vessel CIP Die Set (110 mm ID) for Cold Isostatic Press - CIP110D200—

$14,985.00

$5,244.75

Product Information

Shipping & Returns

Description

CIP110D200 is a CIP die set (Max. 200 MPa) for cold isostatic press with a 110 mm ID x 125 mm depth chamber. It is an excellent tool for preparing a Max. 4" dia. sample with a much higher density.

Specifications:
CIP Camber Size 110 mm ID x 125 mm Depth
Vessel Pressure
  • 0 - 200 MPa
  • 1 MPa / 5 min
Actual Force Applied on the Hydraulic Cylinder (Ton) 95 190
CIP Die Pressure (Mpa) 100 200
Compatible Press
200T Electric Hydraulic Press
Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic.1 to order).  Check this link to understand liquid rubber for sample preparation. 
  • You may use a small vacuum sealer to seal the sample before CIP inside a glovebox to avoid air contamination ( Click Pic. 2 to order)
  • You may use the machine as a dry pressing to order pressing die (click Pic below right)
  •      Pic. 1   Pic. 2   Pic. 3
Warning
  • Never let the press hold the target pressure be longer than 8 minutes
  • Normally, the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve have been tightened before pressing

 

200MPa Vessel CIP Die Set (110 mm ID) for Cold Isostatic Press - CIP110D200 | MTI Online Store