✨ New Arrivals Just Dropped!Explore
HomeStore

Al-Clad CR2032 Coin Cell Case (20d x 3.2mm) for Li-ion Battery for > 4.5V - 60 Sets/pck-CR2032CASE-AL2S

Product image 1

Al-Clad CR2032 Coin Cell Case (20d x 3.2mm) for Li-ion Battery for > 4.5V - 60 Sets/pck-CR2032CASE-AL2S

This is a special CR2032 coin cell case with Aluminum coated on the inside and outside of the positive can (60pcs/pack). It can tolerate polarization of higher voltages (up to 5.5V) due to the passivation of cladding by electrolyte component (especially LiPF6 based electrolyte system) to form a layer of AlF3. This AlF3 layer is thin enough (several angstroms) to allow electron tunneling, and simultaneously blocking the dissolution of Al3+ into the electrolyte. 
For more information on this Al-Clad coin cell case, please read a testing report by Dr. John B. Kerr's Research Group from the Lawrence Berkeley National Laboratory (LBL). MTI would like to extend our special thanks to Dr. John B. Kerr and Dr. Li Yang for their contributions and findings in this test.
Specifications
Material Stainless Steel 304 with the Aluminum coating:
  • Aluminum-Clad on both inside and outside of the POSITIVE case (bottom part, larger, connects to the Cathode with Al current collector), to prevent electrolyte from reacting with steel during high voltage charging > 4.5V.
  • Negative case without Al coating (the top part with insulating O-ring, smaller, connects to Anode with Cu current collector): made of SS304, you may need to put Spring/Spacer in between this case and anode. If the negative case needs Al coating, please contact us with special requirement. 
  • Sealing Gasket: PP
  • Max. working temperature: 80oC
Aluminum coating thickness
  • 1 micron with 99.7% purity
Dimensions (Dia x Height)
  • 20mm x 3.2mm
Optional 
  • Please click the picture below to order Al spacer and spring
Application
  • Excellent for developing new Li-ion rechargeable batteries up to 5.5V because of Al-cladding
  • Warning Please never use water clean Al clad case to avoid Aluminium coating oxidization. Please keep the case in the vacuum or glove box if not used for a long time.
  • Do not clean the Al clad case with ultrasonic cleaners. Please clean with alcohol if cleaning is needed.
  • We only promise MTI crimper makes good sealing on these cell cases, no guaranty for the other brand crimper
Options

Gold-Coated Button Cell Case


Pt Coated Button Cell Case

CR2016 coin cell case for
in-situ XRD analysis
Coin Cell Cases & Realted Components
Pls click picture to find 
other size coin cell

 

$86.80

Original: $248.00

-65%
Al-Clad CR2032 Coin Cell Case (20d x 3.2mm) for Li-ion Battery for > 4.5V - 60 Sets/pck-CR2032CASE-AL2S—

$248.00

$86.80

Product Information

Shipping & Returns

Description

This is a special CR2032 coin cell case with Aluminum coated on the inside and outside of the positive can (60pcs/pack). It can tolerate polarization of higher voltages (up to 5.5V) due to the passivation of cladding by electrolyte component (especially LiPF6 based electrolyte system) to form a layer of AlF3. This AlF3 layer is thin enough (several angstroms) to allow electron tunneling, and simultaneously blocking the dissolution of Al3+ into the electrolyte. 
For more information on this Al-Clad coin cell case, please read a testing report by Dr. John B. Kerr's Research Group from the Lawrence Berkeley National Laboratory (LBL). MTI would like to extend our special thanks to Dr. John B. Kerr and Dr. Li Yang for their contributions and findings in this test.
Specifications
Material Stainless Steel 304 with the Aluminum coating:
  • Aluminum-Clad on both inside and outside of the POSITIVE case (bottom part, larger, connects to the Cathode with Al current collector), to prevent electrolyte from reacting with steel during high voltage charging > 4.5V.
  • Negative case without Al coating (the top part with insulating O-ring, smaller, connects to Anode with Cu current collector): made of SS304, you may need to put Spring/Spacer in between this case and anode. If the negative case needs Al coating, please contact us with special requirement. 
  • Sealing Gasket: PP
  • Max. working temperature: 80oC
Aluminum coating thickness
  • 1 micron with 99.7% purity
Dimensions (Dia x Height)
  • 20mm x 3.2mm
Optional 
  • Please click the picture below to order Al spacer and spring
Application
  • Excellent for developing new Li-ion rechargeable batteries up to 5.5V because of Al-cladding
  • Warning Please never use water clean Al clad case to avoid Aluminium coating oxidization. Please keep the case in the vacuum or glove box if not used for a long time.
  • Do not clean the Al clad case with ultrasonic cleaners. Please clean with alcohol if cleaning is needed.
  • We only promise MTI crimper makes good sealing on these cell cases, no guaranty for the other brand crimper
Options

Gold-Coated Button Cell Case


Pt Coated Button Cell Case

CR2016 coin cell case for
in-situ XRD analysis
Coin Cell Cases & Realted Components
Pls click picture to find 
other size coin cell

 

Al-Clad CR2032 Coin Cell Case (20d x 3.2mm) for Li-ion Battery for > 4.5V - 60 Sets/pck-CR2032CASE-AL2S | MTI Online Store