✨ New Arrivals Just Dropped!Explore
HomeStore

Lithium Foil (0.75 mm thick x 19mm W x 3000 mm L) for Li-ion Battery R&D, 22g/bag -MF-Li25

Product image 1

Lithium Foil (0.75 mm thick x 19mm W x 3000 mm L) for Li-ion Battery R&D, 22g/bag -MF-Li25

For Sale within the Continental US Only

UPS GROUND Only transportation regardless of shipping method selected

Lithium metal is widely used for Li-ion rechargeable battery R&D, Please click the link below to see a paper published in Nature Communication" which use MTI metal foil: 
High rate and stable cycling of lithium metal anode
by Jiangfeng Qian, Wesley A. Henderson, Wu Xu, Priyanka Bhattacharya, Mark Engelhard, Oleg Borodin & Ji-Guang Zhang

SPECIFICATIONS:
Purity
  • 99.9% Lithium
Melting Point
  • 180.5 °C 
Density
  • 0.534 g/cm3
Color
  • Silver
Dimension
  • 0.75mm thick x 19mm wide, roughly 3 meters long 
Chemical Ingredients
lithium 99.9%
sodium 0.020%
potassium 0.005%
calcium 0.020%
iron 0.005%
nitrogen 0.020%
silicon 0.008%
chlorine 0.006%
aluminum 0.0050%
nickel 0.0030%
copper 0.0040%
magnesium 0.010%
Net Weight
  • 22g/bag
Sealing
  • sealed in Al bag with filled Ar
Use
  • Clean the surface of the lithium foil using a nylon brush/stainless steel scalpel until a shiny silvery surface appears (inside an argon glovebox).
Safety Data Sheet
Operation
  • The package must be opened and stored inside a glove box with Argon Gas and moisture less than 8 ppm and O2 less than 2 PPM. Never use N2 gases in the glovebox!!!
  • Vacuum overpressure may blow the package during antichamber transfer. [only half range of vacuum for more times]
  • No return or refund for misusing or wrong storage which causes The lithium foil oxidation
Notes
  • MTI does not accept international orders due to restrictions on hazard material exportation!!!
  • MTI reserves the right to charge an additional handling fee due to special shipping/handling requirements.
  • Operation and Storage: Lithium is very active in the air, please carefully read the SDS carefully.
  • Lithium foil may be oxidized during handling and storage. if you find any oxidation on the surface of the Li-foil, please use a nylon brush/stainless steel scalpel to remove it before using it.
  • If the Li metal is stored in mineral oil, please refer to this guide on How to clean mineral oil off Lithium metal using anhydrous Toluene
  • If you would like to thinner foil, please consider using the rolling machine by DIY
Lithium Storage Options

Bench-Top Fume Hood with Lamp & Blower with optional Carbon-filtered Enclosures, 45"Wx 25"Dx 41"H, EQ-FH-36

Bench-Top Fume Hood with Lamp & Blower with optional Carbon-filled Enclosures, 45"x 25" x 41", W x D x H-- FH36

53L Stainless Steel Vacuum Chamber for Sample Storage ( 16x13x14" ) -- SVC-6050

Compact Stainless Steel Vacuum Glove Box (22"x17"x16") - EQ-VGB-1

 

 

$314.30

Original: $898.00

-65%
Lithium Foil (0.75 mm thick x 19mm W x 3000 mm L) for Li-ion Battery R&D, 22g/bag -MF-Li25—

$898.00

$314.30

Product Information

Shipping & Returns

Description

For Sale within the Continental US Only

UPS GROUND Only transportation regardless of shipping method selected

Lithium metal is widely used for Li-ion rechargeable battery R&D, Please click the link below to see a paper published in Nature Communication" which use MTI metal foil: 
High rate and stable cycling of lithium metal anode
by Jiangfeng Qian, Wesley A. Henderson, Wu Xu, Priyanka Bhattacharya, Mark Engelhard, Oleg Borodin & Ji-Guang Zhang

SPECIFICATIONS:
Purity
  • 99.9% Lithium
Melting Point
  • 180.5 °C 
Density
  • 0.534 g/cm3
Color
  • Silver
Dimension
  • 0.75mm thick x 19mm wide, roughly 3 meters long 
Chemical Ingredients
lithium 99.9%
sodium 0.020%
potassium 0.005%
calcium 0.020%
iron 0.005%
nitrogen 0.020%
silicon 0.008%
chlorine 0.006%
aluminum 0.0050%
nickel 0.0030%
copper 0.0040%
magnesium 0.010%
Net Weight
  • 22g/bag
Sealing
  • sealed in Al bag with filled Ar
Use
  • Clean the surface of the lithium foil using a nylon brush/stainless steel scalpel until a shiny silvery surface appears (inside an argon glovebox).
Safety Data Sheet
Operation
  • The package must be opened and stored inside a glove box with Argon Gas and moisture less than 8 ppm and O2 less than 2 PPM. Never use N2 gases in the glovebox!!!
  • Vacuum overpressure may blow the package during antichamber transfer. [only half range of vacuum for more times]
  • No return or refund for misusing or wrong storage which causes The lithium foil oxidation
Notes
  • MTI does not accept international orders due to restrictions on hazard material exportation!!!
  • MTI reserves the right to charge an additional handling fee due to special shipping/handling requirements.
  • Operation and Storage: Lithium is very active in the air, please carefully read the SDS carefully.
  • Lithium foil may be oxidized during handling and storage. if you find any oxidation on the surface of the Li-foil, please use a nylon brush/stainless steel scalpel to remove it before using it.
  • If the Li metal is stored in mineral oil, please refer to this guide on How to clean mineral oil off Lithium metal using anhydrous Toluene
  • If you would like to thinner foil, please consider using the rolling machine by DIY
Lithium Storage Options

Bench-Top Fume Hood with Lamp & Blower with optional Carbon-filtered Enclosures, 45"Wx 25"Dx 41"H, EQ-FH-36

Bench-Top Fume Hood with Lamp & Blower with optional Carbon-filled Enclosures, 45"x 25" x 41", W x D x H-- FH36

53L Stainless Steel Vacuum Chamber for Sample Storage ( 16x13x14" ) -- SVC-6050

Compact Stainless Steel Vacuum Glove Box (22"x17"x16") - EQ-VGB-1

 

 

Lithium Foil (0.75 mm thick x 19mm W x 3000 mm L) for Li-ion Battery R&D, 22g/bag -MF-Li25 | MTI Online Store