MSK-TE908-UL is an NRTL-ready Free Fall Tester for lithium-ion battery packs to meet IEC-62133-8.3.3 standard. The unique vacuum chuck is used for holding the battery quickly and the remote controller is included for more safe operation.

SPECIFICATIONS

Power	208 - 240VAC, single phase, 50/60Hz 110VAC is available upon request via a 1500W transformer Power consumption: 1KW
Cell Testing compatibility	Compatible with battery pack up to 5 kg net weight Testing Standards: UN 38.3.4.6, GB31241-2014, GB/T18287-2000...
Sample Holder	Multi vacuum chucks are built in to hold battery pack sample The heavy-duty vacuum pump and connecting tube are included for immediate use. Max. sample size 100 mm x100mm ( no limited at length )
Free Fall Height	300 mm - 1500 mm adjustable via electric motor at the control panel
Chamber	Anti-explosion reinforced double-layer steel chamber Inside chamber: made of 1 mm thickness cold rolled SS304 with tensile strength > 500 Mpa Outside casing: made of 3 mm thickness annealed A3 steel with Tensile strength > 400 Mpa Explosion-proof window: L382*W332mm  Double layer 5 mm thick anti-explosion glass with sandwiched shattering-proof film  Max. Working Space in the chamber: L300mm*W250mm*H1000mm Build-in illuminator Rolling wheels are installed on the bottom for easy transportation.
Control Unit	6" color touchscreen control panel for operating and setting parameters  Electric motor with worm gear reducer for raising and lowering the weight In the case of an electrical outage, the weight will be lowered and locked in position automatically Once the parameter is set on the touch screen, a wireless hand-held remote controller will operate the machine within 10 meters distance for the safest operation
Venting	A venting port with a high-quality exhaust fan is installed in the back chamber which shall be connected to your venting system. (ducting and exhaust system are not included ) Warning: Must keep a venting fan and exhaust system running during battery testing to avoid pressure build-up in the case of a battery explosion. Centrifugal in-line exhaust fan with aluminum flex duct connection is recommended and optional. (Click the picture below to read details)
Safety Door	A pressure relief door is on the back of the chamber. In the case of a battery explosion, the door will "pop" to release the pressure inside of the chamber. Attention: Do not block the Pressure Relief Door
Compliance	CE certified All electric components ( >24V) are UL / CSA certified The machine is ready to pass TUV(UL61010) or CSA certification at extra cost.
Application Notes	Other equipment for testing of IEC 62133 or UN38.3 Standards can be found at MTI online web.