✨ New Arrivals Just Dropped!Explore
HomeStore

1200°C Three Zones Vertical Tube Furnace with 2" Quartz Tube & Vacuum Flanges - OTF-1200X-VT-III-50

Product image 1
1 / 2

1200°C Three Zones Vertical Tube Furnace with 2" Quartz Tube & Vacuum Flanges - OTF-1200X-VT-III-50

OTF-1200X-VT-III-50 is a three-heating-zone split Vertical Tube Furnace with a vacuum-sealed 50 mm diameter quartz tube. It can achieve faster sample heating and quenching in vacuum or gas flow, and use for PVD, CSS or CVD coating. Three precision temperature controllers provide 30 30-segment heating and cooling program with +/- 1°C accuracy independently. The vertical tube furnace is installed in a mobile cart for easy moving.

SPECIFICATIONS:

Furnace Structure
 
  • Double-layer steel structure with air cooling to keep the case temperature <65°C
  • High purity fibrous alumina insulation with a Special coating to ensure max. energy saving
  • Foam ceramic blocks with alumina coating are included, which is hung on top and bottom of flange to protect the O-ring from being damaged by heat radiation.
  • The wheel is installed on the split top cover.

Power

 4.8KW (30Amps circuit breaker is recommended)

Voltage

 AC 208-240V Single Phase, 50/60 Hz

Max. Temperature

 1200°C (<1 hr) each zone

Continuous Temperature

 1100°C for each zone

Max. Heating Rate

 <= 20°C/min.

Temperature Accuracy

 +/- 1°C

Tube Size and Materials
  • One 1200mm length quartz tube is included
  • OD: 50 mm, ID. 44 mm
  • Foam ceramic blocks with alumina coating are included, which is hung on top of the flange to protect O-ring damaged by heat radiation
  • The furnace can be modified for Ø50 - Ø130 mm quartz tube. 

Heating Zone Length
  • Heating Zone: Total: 610 mm (152.4 mm +304.8 mm + 152.4 mm )
  • Constant Temp. Zone: 480 mm within +/- 2 oC

Temperature Controller
     
  • MET certified 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.
  • Built-in PID Auto-Tune function with overheating & broken thermocouple broken protection.
  • Over-temperature protection and alarm allow for operation without an attendant.
  • RS485 Communication Port.
  • You may upgrade the controller to Eurotherm 3000 for +/- 0.1oC accuracy
Vacuum Sealing Flange
  • Two stainless steel flanges with vacuum gauge and valves included
    • Gas outlet ( vacuum port ) on top with 1/4" barb connector. 
    • Gas inlet on the bottom with 1/4" barb connector
  • A hook ring is welded inside the top flange for hanging thermal block. You may choose any connectors (KF25D adapter, 1/4'' Swagelok Tube Fitting) as shown in the picture left at extra cost.


Vacuum Level

  • 10E-2 Torr by a mechanical vacuum pump

  • 10E-5 Torr by molecular pump

  •  Leak rate < 5 mTorr / min.

Heating Element

1300°C Fe-Cr-Al Alloy doped by Mo

Laptop, software (Optional)

   
  • Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) 
  • Labview Based Temperature Control System (MTS01)enables users to edit temperature profiles, manage heat-treatment recipes, record, and plot data for MTI furnaces.
  • A wireless remote control provides up to 300 meters of operating range.
Compliance
  • CE Certified
  • NRTL or CSA certification is available at extra cost.

Application Note

 ( We may help you to build customized flange to meet your application at extra cost )
  • Customers may calibrate temperature before use to obtain accurate temperature inside the tube furnace, please click here to learn how.
  • Please click the picture below to learn how to quench sample in gas flow and vacuum
    • Approach#1: Traditional wire cut and free-falling ( Fig. 1 & 2 )
    • Approach#2: Electromagnetic release and free-falling. (Fig 3 & 4 )
Fig. 1 Fig. 2  Fig. 3 
  • The furnace can be modified into an HPCVD ( hybrid physical-chemical vapor deposition ) furnace via DIY a sample susceptor ( click picture below-left to see how )
  • The furnace can be used for brazing of two flat < 1" diameter sample via top dead weight under vacuum at <1000° ( click picture below -right to see how )
       

Warning

Click here to learn more about the installation of a gas regulator.
  • The tube furnaces with quartz tube are designed for use under vacuum and low pressure <0.2 bar / 3 psi / 0.02 MPa. Vacuum pressures may only be safely used up to 1000°C. The flow rate for gases should be limited to < 200 SCCM (or 200ml/min) for reducing thermal shocks to the tube.
  • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.

 

$6,649.30

Original: $18,998.00

-65%
1200°C Three Zones Vertical Tube Furnace with 2" Quartz Tube & Vacuum Flanges - OTF-1200X-VT-III-50—

$18,998.00

$6,649.30

Product Information

Shipping & Returns

Description

OTF-1200X-VT-III-50 is a three-heating-zone split Vertical Tube Furnace with a vacuum-sealed 50 mm diameter quartz tube. It can achieve faster sample heating and quenching in vacuum or gas flow, and use for PVD, CSS or CVD coating. Three precision temperature controllers provide 30 30-segment heating and cooling program with +/- 1°C accuracy independently. The vertical tube furnace is installed in a mobile cart for easy moving.

SPECIFICATIONS:

Furnace Structure
 
  • Double-layer steel structure with air cooling to keep the case temperature <65°C
  • High purity fibrous alumina insulation with a Special coating to ensure max. energy saving
  • Foam ceramic blocks with alumina coating are included, which is hung on top and bottom of flange to protect the O-ring from being damaged by heat radiation.
  • The wheel is installed on the split top cover.

Power

 4.8KW (30Amps circuit breaker is recommended)

Voltage

 AC 208-240V Single Phase, 50/60 Hz

Max. Temperature

 1200°C (<1 hr) each zone

Continuous Temperature

 1100°C for each zone

Max. Heating Rate

 <= 20°C/min.

Temperature Accuracy

 +/- 1°C

Tube Size and Materials
  • One 1200mm length quartz tube is included
  • OD: 50 mm, ID. 44 mm
  • Foam ceramic blocks with alumina coating are included, which is hung on top of the flange to protect O-ring damaged by heat radiation
  • The furnace can be modified for Ø50 - Ø130 mm quartz tube. 

Heating Zone Length
  • Heating Zone: Total: 610 mm (152.4 mm +304.8 mm + 152.4 mm )
  • Constant Temp. Zone: 480 mm within +/- 2 oC

Temperature Controller
     
  • MET certified 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.
  • Built-in PID Auto-Tune function with overheating & broken thermocouple broken protection.
  • Over-temperature protection and alarm allow for operation without an attendant.
  • RS485 Communication Port.
  • You may upgrade the controller to Eurotherm 3000 for +/- 0.1oC accuracy
Vacuum Sealing Flange
  • Two stainless steel flanges with vacuum gauge and valves included
    • Gas outlet ( vacuum port ) on top with 1/4" barb connector. 
    • Gas inlet on the bottom with 1/4" barb connector
  • A hook ring is welded inside the top flange for hanging thermal block. You may choose any connectors (KF25D adapter, 1/4'' Swagelok Tube Fitting) as shown in the picture left at extra cost.


Vacuum Level

  • 10E-2 Torr by a mechanical vacuum pump

  • 10E-5 Torr by molecular pump

  •  Leak rate < 5 mTorr / min.

Heating Element

1300°C Fe-Cr-Al Alloy doped by Mo

Laptop, software (Optional)

   
  • Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) 
  • Labview Based Temperature Control System (MTS01)enables users to edit temperature profiles, manage heat-treatment recipes, record, and plot data for MTI furnaces.
  • A wireless remote control provides up to 300 meters of operating range.
Compliance
  • CE Certified
  • NRTL or CSA certification is available at extra cost.

Application Note

 ( We may help you to build customized flange to meet your application at extra cost )
  • Customers may calibrate temperature before use to obtain accurate temperature inside the tube furnace, please click here to learn how.
  • Please click the picture below to learn how to quench sample in gas flow and vacuum
    • Approach#1: Traditional wire cut and free-falling ( Fig. 1 & 2 )
    • Approach#2: Electromagnetic release and free-falling. (Fig 3 & 4 )
Fig. 1 Fig. 2  Fig. 3 
  • The furnace can be modified into an HPCVD ( hybrid physical-chemical vapor deposition ) furnace via DIY a sample susceptor ( click picture below-left to see how )
  • The furnace can be used for brazing of two flat < 1" diameter sample via top dead weight under vacuum at <1000° ( click picture below -right to see how )
       

Warning

Click here to learn more about the installation of a gas regulator.
  • The tube furnaces with quartz tube are designed for use under vacuum and low pressure <0.2 bar / 3 psi / 0.02 MPa. Vacuum pressures may only be safely used up to 1000°C. The flow rate for gases should be limited to < 200 SCCM (or 200ml/min) for reducing thermal shocks to the tube.
  • Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator.

 

1200°C Three Zones Vertical Tube Furnace with 2" Quartz Tube & Vacuum Flanges - OTF-1200X-VT-III-50 | MTI Online Store